EEPM-CIT Electro-Permanent Magnetic Chunk EEPM Series MagVise Magnetic Workholding (Standard Type) Earth- Chain Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Suppliers, Supply, Supplies

MES MOULDING EQUIPMENT SUPPLIES SDN BHD
20, Jalan BP 5/2,
Bandar Bukit Puchong,
47100 Puchong,
Selangor, Malaysia.

+603-8061 8188

+603-8061 9188

EEPM-CIT

11 / 14

Suitable in use for combine with CNC 4 Axis Index Device

Features

Super power magnetic force 1250kgf/100cm2+-5%. (4 Poles)
Control each working face for ON and OFF, so it can be load and unload the workpiece on each working face. 3 seconds control for power ON and OFF.
EEPM-CIT2F with 2 magnetic working face, can be clamp 2 workpiece for machining. Suitable for bigger workpiece machining.
EEPM-CIT2F2T with 2 magnetic working face and 2 T-slot working face, can be clamp both of magnetic and non-magnetic material of workpiece machining. Suitable for smaller workpiece machining.
EEPM-CIT4FT with 4 magnetic working face and T-slots available. Suitable for smaller workpiece machining.
Without any obstructed movement of cutters during machining. Can be use all the functions of CNC 4 Axic Index Device completely.

Specification

Suitable in use for combine with CNC 4 Axis Index Device.
Minimum thickness of workpiece required : 10mm.
Minimum size of workpiece required as 4 alternate magnetic square poles and above is necessary for optimum clamping.

Working Example

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*